Single tube infrared lamp

Tue, 14 Jul 2026 11:31:09 +0800

Getting Low-E Glass Preheating Right (Even When It’s 3 Meters Wide)

If you’ve ever worked with wide-format Low-E glass, you know the headache of “cold spots.” When your oven is over 3 meters wide, those standard modular lamp arrays usually leave gaps at the joints. It’s frustrating. You get a thermal profile that looks like a mountain range instead of a flat line. We figured out a better way: we just build one continuous, single-tube infrared unit that fits your exact footprint. No joints. No gaps. The electrical side of things Now, running a single tube over 3 meters isn’t as simple as just making a longer piece of glass. It’s a bit of a balancing act. If you don’t get the voltage and wattage exactly right, the ends might burn out while the middle sags. We spend a lot of time calculating the ohms per centimeter. Why? Because if your power supply fluctuates even a little, that filament is gone. We make sure the heat stays flat and consistent across the entire 3000mm+ span. It just works. Built to actually last Since these tubes are so long, they want to bow. To stop that, we use heavy-wall quartz glass. It’s tougher and handles the mechanical stress much better. But the glass is only half the battle. You need a rigid support frame to keep everything perfectly parallel to the glass. We also use specific end-cap connectors—usually R7s or custom SK series—so the wiring stays secure and your terminals don’t melt under the current. What this means for your Low-E line In a coating line, you need the glass hot, and you need it fast, but you can’t be cooking the edges. By getting rid of those segmented systems, you get a uniform soak. It’s a much smoother process. Just a heads-up: these ultra-long units are delicate when you’re putting them in. One wrong move or a clumsy bump during the drop-in, and you’ve got a cracked tube. Your maintenance crew will need a steady hand and a precise jig for the install. And one last thing—these things put out a massive amount of heat. Make sure your exhaust hoods are actually strong enough to pull that air away. If they aren’t, you’re going to fry your control electronics, and nobody wants to deal with that.

Single on Complete IR Heating Systems

Single tube infrared lamp

Getting Low-E Glass Preheating Right (Even When It’s 3 Meters Wide)